Diamond monogram SVGs from the diamond monogram maker: three initials stretched and clipped into a diamond, outline on its own layer. Samples in four fonts below; the zip includes the A to Z single-letter diamond set in Bebas Neue, useful for coasters and tiles.
Download the diamond monogram svgs zip (32 SVG files)
The zip holds every sample on this page as a separate SVG. It also contains the full A to Z set in Bebas Neue (26 files). Every file is paths only, 6 by 6 inches, with the letters, frame and text on separate layers; resize it in your cutting software or see how to resize an SVG.
Files in this pack
What you will cut (measured from the files)
We measured every SVG in this pack. “Cut lines” counts the closed outlines the blade follows, including the inside of letters such as A and O; more cut lines means more weeding. Cut length is the total distance the blade travels with the file resized to 4 inches wide, and it scales with size: at 8 inches it doubles. In the A to Z set the shortest cut is J (30.4 in) and the longest is M (40.9 in), an average of 34.6 inches per letter; cutting all 26 at 4 inches is about 75 feet of blade travel.
| File | Cut lines | Cut length at 4 in | Of which frame |
|---|---|---|---|
| JMK in montserrat | 5 | 49.4 in | 22.0 in |
| ABC in bebas-neue | 5 | 49.2 in | 22.0 in |
| TRW in cinzel | 8 | 54.7 in | 22.0 in |
| LEO in fredoka | 7 | 44.8 in | 22.0 in |
| SEA in bungee | 6 | 47.1 in | 22.0 in |
| HGP in titan-one | 6 | 45.4 in | 22.0 in |
| A to Z set (26 files) | 3 to 5 | 30.4 to 40.9 in | 22.0 in |
The busiest file here is diamond-monogram-trw-cinzel, with 8 separate cut lines. Allow extra weeding time for designs like that, and cut them larger if your material tears.
Fitting a diamond monogram to coasters and tiles
The diamond style clips three letters into a rhombus, so the left and right letters taper to a point and the middle letter is the tallest. The frame (the outline) is on its own layer. On a 4 inch square coaster or tile, size the diamond to 3.5 inches so there is a margin all round; that is a common size for coasters but measure yours first. The A to Z set in Bebas Neue fills the diamond with one letter, which suits coaster sets where each guest has an initial.
Because the letters are clipped, their outer edges are straight lines that follow the diamond. If you cut the outline and the letters from the same colour, attach them rather than welding, so the narrow gap between the letters and the outline stays open. For sublimation or printing, keep the file as a vector and set the colour in your design software.
Fonts with even strokes work best here. A script would be squeezed into the points of the diamond and lose its shape, which is why this pack uses Montserrat, Bebas Neue, Cinzel, Fredoka, Bungee and Titan One.
Frequently asked questions
What size diamond monogram fits a 4 inch coaster?
About 3.5 inches from point to point, which leaves roughly a quarter inch margin on each side. Measure the flat area of your coaster first.
Why does the diamond monogram not use script fonts?
The side letters are clipped to the points of the diamond. Script letters lose their shape there, so bold sans and serif fonts give a more legible result.
Make your own
These are samples with fixed initials. To make the same design with your own letters, colours and size, open the diamond monogram maker; it produces the same file format. For letter order and sizing see the etiquette guide and the size chart.
Other free monogram packs
- Free Circle Monogram SVG Files
- Free Split Monogram SVG Files (A to Z)
- Free Wedding Monogram SVG Samples
- Free Vine Monogram SVG Files
- Free Old English Letters SVG (A to Z)
- Free Bubble Letters SVG (A to Z)
- Free Script Monogram SVG Files
- Free Two Letter Monogram SVG Samples
- Free Single Initial Monogram SVG (A to Z, Wreath)
- All free SVG cutting files
Last reviewed: 25 September 2026. The fonts are open-licensed (SIL OFL or Apache 2.0); see the font list for each licence. The frames are drawn by our own code. Something not working? Please let us know.